Bind to a single NIC

yagigain · Post by **yagigain** » Tue May 12, 2015 5:12 am

Hi,

Ive got a Soft Ether server setup and appears to be running.

I want all traffic to be routed via the VPN, and I have this working with the virtual NAT, but only for about 30-60 after connecting and then I can't get anything over the connection.

I'm thinking maybe its because the server has 6 NICs, 5 are in use.

Can I force Soft Ether to bind just to 1 NIC ? We are currently using Open VPN and we are able to bind it to just the specific NIC.

thx !

kh_tsang · Post by **kh_tsang** » Tue May 12, 2015 6:05 am

You may use a tap device and do routing and NAT with your system, then you can decide how the routing works.

yagigain · Post by **yagigain** » Tue May 12, 2015 6:41 am

Thanks for the reply.

So I have eth0-5 on the server side. (only 1 NIC clientside)

I need Soft Ether to bind to eth3 on the server side, as eth3 has internet access.

Is not possible to do directly with the Soft Ether config ?

Regards

Edit - btw running Centos 6.6 Server side (not windows).

kh_tsang · Post by **kh_tsang** » Tue May 12, 2015 9:02 am

Softether VPN Server does not provide many settings, features are also limited.

yagigain · Post by **yagigain** » Tue May 12, 2015 10:45 am

Guess I could try and make a virtual server with just 1 nic for Soft ether, just more overhead and network performance slows between the 2 servers compared too all on one.

thx.

Post by **thisjun** » Thu May 21, 2015 6:08 am

Please try to disable kernel mode SecureNAT on Virtual Hub Extended Option.

Bind to a single NIC

Bind to a single NIC

Re: Bind to a single NIC

Re: Bind to a single NIC

Re: Bind to a single NIC

Re: Bind to a single NIC

Re: Bind to a single NIC