can only ping vpn server

[marcmoennikes]

Hello,

i am new to soft ehther.
I have installed soft ether server on windows 2008R2 (hyper-v guest).
soft ether server has one NIC.
Created hub and user for testing.
I have installed soft ether client on my windows client.
I can connect with the client to the server.
i can also reach the soft ether server (pin, rdp and so on).
but i can not reach any other server/device in the subnet.

I also want to connect other devices which are in different subnets, "behind" the soft ether server.

Soft ether server IP : 192.168.1.13/24
IP (manually configured "softether LAN connection): 192.168.1.20/24
i have configured default GW IP at "softether LAN Connection" : 192.168.1.1 (this gateway has to be used to reach other private subnets).

i can only reach the 192.168.1.13 (server ip).

Maybe somebody has an idea?
Where can i begin to troubleshoot?
Do i need an additional NIC on server side?

Regards

Marc

[dajhorn]

Install the SoftEther server on a real computer with real ethernet interfaces for initial testing. Many virtualization environments do not bridge virtual interfaces in the way that you might expect or the way that SoftEther requires.

[DJI]

Hyper-V does not do promiscuous mode correctly, you can only see some traffic if you do some powershell magic.

[marcmoennikes]

Hello,

thanks to all for help. Replaced hyper-v guest with physical pc, now working

Regards