Hi
I have a softether server used with several openvpn clients on windows. No worries there
Recently I connected a raspberry with openvpn client. Once the VPN is set-up, all traffic from the raspberry is routed through the VPN. I want to avoid ghis to only use the VPN for distant administrative purposes of the RPI
I do not find how to modify this neither on client side or server side .... Any ideas ?
Thank you
Franck
Modifying routing default on openVPN client in raspberry
-
- Posts: 2
- Joined: Wed Jul 24, 2019 9:11 am
-
- Posts: 2
- Joined: Thu Feb 27, 2020 8:49 am
Re: Modifying routing default on openVPN client in raspberry
Hi, Franck
On windows (where you have VPN client running)-
Settings>>Network&Internet>>VPN>>Change adapter settings
select the VPN adapter you have >>Properties>>Networking>>Internet Protocol v4>>Properties>>Advanced
UNTICK the box with Use default gateway on remote network
Then OK.OK.OK.
This should re-route your packets...
Hope this helps.
Gerry
On windows (where you have VPN client running)-
Settings>>Network&Internet>>VPN>>Change adapter settings
select the VPN adapter you have >>Properties>>Networking>>Internet Protocol v4>>Properties>>Advanced
UNTICK the box with Use default gateway on remote network
Then OK.OK.OK.
This should re-route your packets...
Hope this helps.
Gerry