Modifying routing default on openVPN client in raspberry

Post your questions about SoftEther VPN software here. Please answer questions if you can afford.
Post Reply
tamarix
Posts: 2
Joined: Wed Jul 24, 2019 9:11 am

Modifying routing default on openVPN client in raspberry

Post by tamarix » Thu Jan 16, 2020 2:17 pm

Hi

I have a softether server used with several openvpn clients on windows. No worries there

Recently I connected a raspberry with openvpn client. Once the VPN is set-up, all traffic from the raspberry is routed through the VPN. I want to avoid ghis to only use the VPN for distant administrative purposes of the RPI

I do not find how to modify this neither on client side or server side .... Any ideas ?

Thank you
Franck

DU7EYG
Posts: 2
Joined: Thu Feb 27, 2020 8:49 am

Re: Modifying routing default on openVPN client in raspberry

Post by DU7EYG » Thu Feb 27, 2020 9:33 am

Hi, Franck

On windows (where you have VPN client running)-
Settings>>Network&Internet>>VPN>>Change adapter settings
select the VPN adapter you have >>Properties>>Networking>>Internet Protocol v4>>Properties>>Advanced
UNTICK the box with Use default gateway on remote network
Then OK.OK.OK.

This should re-route your packets...

Hope this helps.
Gerry

Post Reply