Is it possible to configure the internal dhcp server in such a way that it would assign the same ip address to a client after the client reconnects? If it is, would it function based on mac filtering or username filtering? I already tried setting the lease time to 0 (default is 7200) but the ok button becomes greyed out once I select 0.
Thanks in advance!
Virtual hub internal DHCP assign same address to same client
-
- Posts: 2
- Joined: Tue Apr 16, 2013 9:46 am
-
- Site Admin
- Posts: 2078
- Joined: Sat Mar 09, 2013 5:37 am
Re: Virtual hub internal DHCP assign same address to same cl
Virtual DHCP server function assigns IP address based on MAC address.
But this MAC-IP table is not persistent.
If you want to manage properly, it makes more sense to use the external DHCP server.
But this MAC-IP table is not persistent.
If you want to manage properly, it makes more sense to use the external DHCP server.
-
- Posts: 2
- Joined: Tue Apr 16, 2013 9:46 am
Re: Virtual hub internal DHCP assign same address to same cl
My purpose is to connect different clients to different virtual hubs so I don't think using an external DHCP server will solve my problem. I need different ip classes for the virtual hubs so that clients are not able to see each other's networks.
Thank you!
Thank you!
-
- Site Admin
- Posts: 2078
- Joined: Sat Mar 09, 2013 5:37 am
Re: Virtual hub internal DHCP assign same address to same cl
You can use DHCP server host with VPN Client to assign different network address for each hub.