How to use the access list

Post your questions about SoftEther VPN software here. Please answer questions if you can afford.
Post Reply
Posts: 148
Joined: Tue Oct 14, 2014 5:36 am

How to use the access list

Post by colapig » Tue Apr 13, 2021 6:26 am

refer to the info:
IP packets that didn't match any access list items can be passed. How can I set only 192.168.1.x, 192.168.2.x and 192.168.3.x can be reached all other network will be rejected to access?
This access list concept is a little bit different with other firewall rule. Is there any document can explain this in detail?
You do not have the required permissions to view the files attached to this post.

Posts: 10
Joined: Wed Mar 24, 2021 5:00 am

Re: How to use the access list

Post by khosoya » Fri Apr 23, 2021 4:53 pm


As far as I know, there is only one well-documented document on this feature, which is the following.

3.5.10 and 3.5.11 in SEVPN Server Manual : ... y_Features

Also, if you want to restrict IP access, please read 3.5.11 of this document.

I hope this is enough information for you.


Post Reply