Page 1 of 1

SoftEther Radius Authentication not working

Posted: Tue Jun 30, 2020 11:12 am
by vishnubraj
I have a user with username "*" setup to forward all the authentication to Radius server.
But i don't see any packets going out to the Radius server.
There is a username with local password login it works fine.
i couldn't find any logs about the issue. Softether is not sending any packets to the Radius server.
Radius server is configured properly. The radius server IP and Secret is configured properly on the SoftEther also.

Please help me to fix this.
Regards
Vishnu

Re: SoftEther Radius Authentication not working

Posted: Wed Jul 01, 2020 3:16 am
by vishnubraj
The packets between the SoftEther and Raidus servers were dropped due to the IP rule configuration. You can ignore this issue.

Re: SoftEther Radius Authentication not working

Posted: Thu Jul 02, 2020 8:27 am
by ianbenkert
It's due to the IP rule configuration.

Re: SoftEther Radius Authentication not working

Posted: Thu Jul 02, 2020 9:55 am
by xiaowei.zhang
@vishnubraj, do you use a commercial version? It always pops up one warning when I want to set up Radius authentication, " open source version cannot support Radius authentication".
where did you buy the commercial one? or you are using a special version?

thank you for your help.