How to connect VPNAzure from a linux softether client

[chengdi123000]

I have 3 questions:

1. How to turn on "Remote Access to VPN server" in linux ?
In the webpage http://www.vpnazure.net/en/, the first step is to turn on "Remote Access to VPN server". But I cannot turn it on in LINUX shell, I have to use a client manager in windows to connect to the vpn server to activate it.
2. I cannot connect my VPNAzure server using linux client?
I cannot use linux client to connect to the the VPN server. But I can use SSTP of win7 to connect to the VPN Azure server.
3. I can connect to VPNAzure server in WIN7 via SSTP, but I cannot access the server using SSH. How can I solve this problem?


-------------------configuration-------------------
softether server:
1. OS
Linux x64
2. ifconfig -a
eth0 Link encap:Ethernet HWaddr D4:3D:7E:72:79:7E
inet addr:192.168.100.100 Bcast:192.168.100.255 Mask:255.255.255.0
inet6 addr: fe80::d63d:7eff:fe72:797e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:17498523 errors:0 dropped:0 overruns:0 frame:0
TX packets:17331913 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2531006814 (2.3 GiB) TX bytes:10040678451 (9.3 GiB)
Interrupt:16 Memory:dfd00000-dfd20000

eth1 Link encap:Ethernet HWaddr D4:3D:7E:72:79:7F
inet addr:192.168.1.135 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::d63d:7eff:fe72:797f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:18255965 errors:0 dropped:0 overruns:0 frame:0
TX packets:30413569 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:6205897356 (5.7 GiB) TX bytes:41790222606 (38.9 GiB)
Interrupt:17 Memory:dfc00000-dfc20000

Ifconfig uses the ioctl access method to get the full address information, which limits hardware addresses to 8 bytes.
Because Infiniband address has 20 bytes, only the first 8 bytes are displayed correctly.
Ifconfig is obsolete! For replacement check ip.
ib0 Link encap:InfiniBand HWaddr A0:00:01:00:FE:80:00:00:00:00:00:00:00:00:00:00:00:00:00:00
inet addr:10.0.0.100 Bcast:10.0.0.255 Mask:255.255.255.0
inet6 addr: fe80::f652:1403:84:5071/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:2044 Metric:1
RX packets:378351051 errors:0 dropped:2324 overruns:0 frame:0
TX packets:21676035 errors:0 dropped:5 overruns:0 carrier:0
collisions:0 txqueuelen:1024
RX bytes:709314541048 (660.6 GiB) TX bytes:34362001036 (32.0 GiB)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:39045259 errors:0 dropped:0 overruns:0 frame:0
TX packets:39045259 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:19228543345 (17.9 GiB) TX bytes:19228543345 (17.9 GiB)
3. uname -a
Linux mu01 2.6.32-358.el6.x86_64 #1 SMP Tue Jan 29 11:47:41 EST 2013 x86_64 x86_64 x86_64 GNU/Linux
4. build number of SoftEther VPN
softether-vpnserver-v4.19-9599-beta-2015.10.19-linux-x64-64bit.tar.gz
5. Which SoftEther VPN component are you using?
softether vpn server without root privilege and VPN Azure
6. Whether or not there is a NAT or Firewall between your VPN server and the Internet.
There is a Firewall, but I cannot access the router and firewall. So I used the vpn azure.
7. Are you using SecureNAT?
I do not understand what is SecureNAT.
8. I just follow the instructions in http://www.vpnazure.net/en/

vpn client
1. OS
linux x64
2. ifconfig -a
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:347 errors:0 dropped:0 overruns:0 frame:0
TX packets:347 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1120990 (1.1 MB) TX bytes:1120990 (1.1 MB)

venet0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:127.0.0.2 P-t-P:127.0.0.2 Bcast:0.0.0.0 Mask:255.255.255.255
UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
RX packets:40594898 errors:0 dropped:0 overruns:0 frame:0
TX packets:36080243 errors:0 dropped:529 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:45133883323 (45.1 GB) TX bytes:23983126171 (23.9 GB)

venet0:0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:104.160.32.72 P-t-P:104.160.32.72 Bcast:104.160.32.72 Mask:255.255.255.255
UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1

vpn_vpn_nic Link encap:Ethernet HWaddr 00:ac:f2:3f:93:3c
inet6 addr: fe80::2ac:f2ff:fe3f:933c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
3. uname -a
Linux localhost 2.6.32-042stab108.2 #1 SMP Tue May 12 18:07:50 MSK 2015 x86_64 x86_64 x86_64
4. build number
softether-vpnclient-v4.19-9582-beta-2015.10.06-linux-x64-64bit.tar.gz
5. component
vpnclient
6. nat or firewall
NO, it is a bandwagon host vps
7. secureNAT?
NO, i do not know what it is
8. config
vpn_client.config
# Software Configuration File
# ---------------------------
#
# You may edit this file when the VPN Server / Client / Bridge program is not running.
#
# In prior to edit this file manually by your text editor,
# shutdown the VPN Server / Client / Bridge background service.
# Otherwise, all changes will be lost.
#
declare root
{
bool DisableRelayServer false
bool DontSavePassword false
bool EnableVPNGateService false
byte EncryptedPassword ******
bool HideVPNGateServiceMessage false
bool PasswordRemoteOnly true
string UserAgent Mozilla/5.0$20(Windows$20NT$206.3;$20WOW64;$20rv:29.0)$20Gecko/20100101$20Firefox/29.0
uint UseSecureDeviceId 0

declare AccountDatabase
{
declare Account0
{
bool CheckServerCert false
uint64 CreateDateTime 1448765368891
uint64 LastConnectDateTime 1449278047923
string ShortcutKey ***
bool StartupAccount false
uint64 UpdateDateTime 1449278044309

declare ClientAuth
{
uint AuthType 1
byte HashedPassword ******
string Username ******
}
declare ClientOption
{
string AccountName to
uint AdditionalConnectionInterval 1
uint ConnectionDisconnectSpan 0
string DeviceName VPN_NIC
bool DisableQoS false
bool HalfConnection false
bool HideNicInfoWindow false
bool HideStatusWindow false
string Hostname ******.vpnazure.net
string HubName VPN
uint MaxConnection 1
bool NoRoutingTracking true
bool NoTls1 false
bool NoUdpAcceleration false
uint NumRetry 4294967295
uint Port 8888
uint PortUDP 0
string ProxyName $
byte ProxyPassword $
uint ProxyPort 0
uint ProxyType 0
string ProxyUsername $
bool RequireBridgeRoutingMode false
bool RequireMonitorMode false
uint RetryInterval 15
bool UseCompress false
bool UseEncrypt true
}
}
}
declare ClientManagerSetting
{
bool EasyMode false
bool LockMode false
}
declare CommonProxySetting
{
string ProxyHostName $
uint ProxyPort 0
uint ProxyType 0
string ProxyUsername $
}
declare Config
{
bool AllowRemoteConfig true
uint64 AutoDeleteCheckDiskFreeSpaceMin 104857600
string KeepConnectHost keepalive.softether.org
uint KeepConnectInterval 50
uint KeepConnectPort 80
uint KeepConnectProtocol 1
bool NoChangeWcmNetworkSettingOnWindows8 false
bool UseKeepConnect false
}
declare RootCA
{
}
declare UnixVLan
{
declare VPN_NIC
{
bool Enabled true
string MacAddress 00-AC-F2-3F-93-3C
}
}
}

[chengdi123000]

I just found that port 443 should be set to connect to the vpn server.

However, I can only get a NIC with IPV6 address. While my server's IP in the vpn is 192.168.30.1, which I cannot connect via SSH or PING.

How can I set the IPV4 address?

ifconfig -a ######################################

...
vpn_vpn_nic2 Link encap:Ethernet HWaddr 00:ac:92:c6:cb:ce
inet6 addr: fe80::2ac:92ff:fec6:cbce/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1127 errors:0 dropped:0 overruns:0 frame:0
TX packets:931 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:78272 (78.2 KB) TX bytes:77090 (77.0 KB)

[thisjun]

You can configure IP address by ifconfig or using DHCP.