I have done a Cascade Connection to let a VPN server connecting to another one.
I found that if I connect through the VPN server, the traffic will go through the cascade connection or the network from the VPN machine randomly.
Is there any method to set up a IP routing to specify different IP address of destination through different route?
Network Map:
-> network from the VPN machine
VPN server
-> cascade connection to another VPN machine
How to do a IP routing for cascade connection
-
- Posts: 2458
- Joined: Mon Feb 24, 2014 11:03 am
Re: How to do a IP routing for cascade connection
There is virtual L3 switch function.
http://www.softether.org/4-docs/1-manua ... 3_Switches
http://www.softether.org/4-docs/1-manua ... 3_Switches
-
- Posts: 6
- Joined: Wed Aug 27, 2014 1:35 pm
Re: How to do a IP routing for cascade connection
thisjun wrote:
> There is virtual L3 switch function.
>
> http://www.softether.org/4-docs/1-manua ... 3_Switches
I cannot do that. Adding a virtual interface require to fill in the IP address, but Cascade Connection do not provide such information. How to do that?
> There is virtual L3 switch function.
>
> http://www.softether.org/4-docs/1-manua ... 3_Switches
I cannot do that. Adding a virtual interface require to fill in the IP address, but Cascade Connection do not provide such information. How to do that?
-
- Posts: 2458
- Joined: Mon Feb 24, 2014 11:03 am
Re: How to do a IP routing for cascade connection
A virtual L3 switch requires an IP address for itself.
A cascade is unconcerned.
A cascade is unconcerned.