Connection problem error code 1 in Korea: Need assistance

Post your questions about VPN Gate Academic Experiment Service here. Please answer questions if you can afford.
Post Reply
hostar
Posts: 3
Joined: Sun Dec 14, 2014 11:10 am

Re: Connection problem error code 1 in Korea: Need assistanc

Post by hostar » Mon Dec 15, 2014 3:25 pm

I would recommend you to follow instructions on this address:
http://www.vpngate.net/en/howto_softether.aspx

If you already have installed SoftEther without VPNGate plugin, just uninstall it and install that one recommended on the page above. The Connection to VPN is pretty much automatic with that, just select server you want to connect to.

BoredAus
Posts: 115
Joined: Sun Nov 23, 2014 3:29 am

Re: Connection problem error code 1 in Korea: Need assistanc

Post by BoredAus » Wed Dec 17, 2014 10:05 am

I agree with what hostar said.

If you insist on connecting to a VPN Gate server by hand, at least make sure that your SoftEther VPN client manager with VPN Gate can see that server on the list. Other than that you have a few issues; Virtual Hub Name should be 'VPNGATE', Auth Type should be 'Anonymous Authentication' with username 'vpn', also you shouldn't need to manually configure the VPN adapter. I can't recall if you need to disable NAT-T or not but try either way.

Post Reply