How Enable IPv6 Service and Allocated Speed To Client
-
- Posts: 17
- Joined: Wed Feb 04, 2015 6:44 am
How Enable IPv6 Service and Allocated Speed To Client
Greetings.
I want to ask on how to enable the IPv6 service using Softether VPN as I am sure that Softether support IPv6. Do I need to create DHCP for the server to distribute the IPv6 address? Can we allocated speed to the client from the server?
Thank you.
I want to ask on how to enable the IPv6 service using Softether VPN as I am sure that Softether support IPv6. Do I need to create DHCP for the server to distribute the IPv6 address? Can we allocated speed to the client from the server?
Thank you.
-
- Posts: 551
- Joined: Wed Jul 24, 2013 12:09 pm
Re: How Enable IPv6 Service and Allocated Speed To Client
If you are using bridge to your LAN, you only need to configure your lan to support IPv6, no need configuration on the Virtual Hub.
-
- Posts: 551
- Joined: Wed Jul 24, 2013 12:09 pm
Re: How Enable IPv6 Service and Allocated Speed To Client
There is one more method. To setup tap_device for each virtual hub, then disable the virtual NAT and use linux routing softwares and dhcp servers.
-
- Posts: 17
- Joined: Wed Feb 04, 2015 6:44 am
Re: How Enable IPv6 Service and Allocated Speed To Client
Thanks kh_tsang for your reply.
I am using Windows Server 2008 for my server hosted by ramnode. Probably, Linux not applicable for Windows.
Is there anything that I need to configure at the VPN Server?
Thank you.
I am using Windows Server 2008 for my server hosted by ramnode. Probably, Linux not applicable for Windows.
Is there anything that I need to configure at the VPN Server?
Thank you.
-
- Posts: 551
- Joined: Wed Jul 24, 2013 12:09 pm
Re: How Enable IPv6 Service and Allocated Speed To Client
Then you can try to use the vpn client to connect to the server itself to make an adapter instead of adding the tap device.
Set a static IP on the vpn adapter and tick no adjustment of routing table in the vpn connection settings.
Set a static IP on the vpn adapter and tick no adjustment of routing table in the vpn connection settings.
-
- Posts: 17
- Joined: Wed Feb 04, 2015 6:44 am
Re: How Enable IPv6 Service and Allocated Speed To Client
Hello kh_tsang.
I did try your method and it works. But the things that I want is the client can have the IPv6 address allocated to the client automatically rather than client enter the IPv6 address manually at the VPN adapter.
Here's the result after I try using your method.
I did try your method and it works. But the things that I want is the client can have the IPv6 address allocated to the client automatically rather than client enter the IPv6 address manually at the VPN adapter.
Here's the result after I try using your method.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 551
- Joined: Wed Jul 24, 2013 12:09 pm
Re: How Enable IPv6 Service and Allocated Speed To Client
You can try to install DHCP server on your Windows Server, the one from Microsoft, and assign addresses on the vpn adapter using it.
-
- Posts: 7
- Joined: Mon Jun 27, 2016 1:10 pm
Re: How Enable IPv6 Service and Allocated Speed To Client
gengkai wrote:
> Hello kh_tsang.
>
> I did try your method and it works. But the things that I want is the
> client can have the IPv6 address allocated to the client automatically
> rather than client enter the IPv6 address manually at the VPN adapter.
>
> Here's the result after I try using your method.
can you help with setup ? please provide a comprehensive tutorial or contact me via skype - zosea.frosea
> Hello kh_tsang.
>
> I did try your method and it works. But the things that I want is the
> client can have the IPv6 address allocated to the client automatically
> rather than client enter the IPv6 address manually at the VPN adapter.
>
> Here's the result after I try using your method.
can you help with setup ? please provide a comprehensive tutorial or contact me via skype - zosea.frosea
-
- Posts: 4
- Joined: Mon May 14, 2018 1:31 pm
Re: How Enable IPv6 Service and Allocated Speed To Client
Hello kh_tsang,
I want to also configure softether ipv4 over ipv6.. I hope you did already this step , shall you share your stop what you did please
I want to also configure softether ipv4 over ipv6.. I hope you did already this step , shall you share your stop what you did please
-
- Posts: 2458
- Joined: Mon Feb 24, 2014 11:03 am
Re: How Enable IPv6 Service and Allocated Speed To Client
Special configuration isn't required for IPv4 over IPv6.
What problem do you have?
What problem do you have?
-
- Posts: 4
- Joined: Mon May 14, 2018 1:31 pm
Re: How Enable IPv6 Service and Allocated Speed To Client
HI
i don't have idea about ipv6 i have configured ipv4 using secure NAT I want to configure ipv6
i don't have idea about ipv6 i have configured ipv4 using secure NAT I want to configure ipv6
-
- Posts: 2458
- Joined: Mon Feb 24, 2014 11:03 am
Re: How Enable IPv6 Service and Allocated Speed To Client
SecureNAT handles inside network.
If you want to configure IPv4 over IPv6, SecureNAT isn't needed to handle IPv6.
If you want to configure IPv4 over IPv6, SecureNAT isn't needed to handle IPv6.