I am using SoftEther VPN Client and it says that I am connected to VPN but what my adapter says is different.
1. Management of VPN Server or VPN Bridge
2. Management of VPN Client
3. Use of VPN Tools (certificate creation and Network Traffic Speed Test Tool)
Select 1, 2 or 3: 2
Specify the host name or IP address of the computer that the destination VPN Client is operating on.
If nothing is input and Enter is pressed, connection will be made to localhost (this computer).
Hostname of IP Address of Destination: localhost
Connected to VPN Client "localhost".
VPN Client>remoteenable
RemoteEnable command - Allow Remote Management of VPN Client Service
The command completed successfully.
VPN Client>accountlist
AccountList command - Get List of VPN Connection Settings
Item |Value
----------------------------+----------------------------------------------
VPN Connection Setting Name |vpn
Status |Connected
VPN Server Hostname |x.x.x.x:5555 (Direct TCP/IP Connection)
Virtual Hub |VPN
Virtual Network Adapter Name|vpn
----------------------------+----------------------------------------------
VPN Connection Setting Name |vpn (2)
Status |Offline
VPN Server Hostname |x.x.x.x:5555 (Direct TCP/IP Connection)
Virtual Hub |VPN
Virtual Network Adapter Name|vpn
The command completed successfully.
VPN Client>accountconnect vpn
AccountConnect command - Start Connection to VPN Server using VPN Connection Setting
Error occurred. (Error code: 35)
The specified VPN Connection Setting is currently connected.
VPN Client>
when I try the ip a command
6: vpn_vpn: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 1000
link/ether 5e:1f:d0:13:71:26 brd ff:ff:ff:ff:ff:ff
inet 192.168.30.10/24 brd 192.168.30.255 scope global vpn_vpn
valid_lft forever preferred_lft forever
inet6 fe80::5c1f:d0ff:fe13:7126/64 scope link
valid_lft forever preferred_lft forever
It says state UNKNOWN.
I am following this thread too https://www.aspkin.com/forums/ip-addres ... toral.html
Any help will be much appreciated.
Ubuntu 18 SoftEther Client Adapter UNKNOWN Status
-
- Posts: 4
- Joined: Wed Jul 11, 2018 9:44 am
-
- Posts: 2458
- Joined: Mon Feb 24, 2014 11:03 am
Re: Ubuntu 18 SoftEther Client Adapter UNKNOWN Status
The IP address is assigned.
I think it works correctly.
I think it works correctly.
-
- Posts: 4
- Joined: Wed Jul 11, 2018 9:44 am
Re: Ubuntu 18 SoftEther Client Adapter UNKNOWN Status
But I don't received any packets :(
-
- Posts: 2458
- Joined: Mon Feb 24, 2014 11:03 am
Re: Ubuntu 18 SoftEther Client Adapter UNKNOWN Status
There isn't adding the static route to the VPN server in the tutorial that you show.