Setting up a site-to-site VPN & can't ping local IP's

Post your questions about SoftEther VPN software here. Please answer questions if you can afford.
Post Reply
FoleyX90
Posts: 2
Joined: Mon Dec 04, 2017 4:48 pm

Setting up a site-to-site VPN & can't ping local IP's

Post by FoleyX90 » Fri Feb 02, 2018 9:56 pm

I'm setting up two boxes to be a site-to-site VPN using cascading.

It shows that the servers are connected to eachother (screenshots: server 1 - http://prntscr.com/i9clol , server 2 - http://prntscr.com/i9cm10 )
however, I can't ping the internal IP of server 2 from server 1 and vice versa (eg. server 1's internal IP is 172.16.20.6 & server 2's internal IP is 172.16.20.7) (note, they ARE NOT behind the same firewall - they have different public IP addresses, only went with the same subnet schema for ease of use. I've also tried with two different subnets (10.0.0.5 & 10.2.0.5) but no use either)

Am I missing any linux routing rules or something?

thisjun
Posts: 2200
Joined: Mon Feb 24, 2014 11:03 am

Re: Setting up a site-to-site VPN & can't ping local IP's

Post by thisjun » Thu Feb 15, 2018 6:24 am

Are these cascade connections connected each other? or connected another VPN server on somewhere?

Post Reply