Multipath
-
- Posts: 3
- Joined: Sat Jul 02, 2016 1:09 pm
Multipath
Can SoftEther work over a multipath TCP connection, like OpenVPN? We'll have two WiFi clients, on different uplinks, and want to use both for redundancy / resilience and also performance. Ultimately we'll also be adding an LTE / 4G connection as well.
-
- Posts: 223
- Joined: Fri Jul 03, 2015 2:21 pm
Re: Multipath
Hi there, may you provide me more details so that i can know exactly what you are trying to do with SE ?
Good luck (:
Good luck (:
-
- Posts: 3
- Joined: Sat Jul 02, 2016 1:09 pm
Re: Multipath
i have an embedded system, connected to multiple devices (not relevant here, but mostly direct serial links for data collection), which then has two possible upstream routes (with a third as an option). The upstream connections then all reach the same server using different gateways. Using multipath tcp (https://multipath-tcp.org/pmwiki.php) I should be able to run an SSH session from the embedded box to the server, load-balancing or at least as a resilient route (with zero failover time).
Can SoftEther work in same way - use multiple different, independent "circuits" from point A to point B, effectively channel-bonded by the multipath - and provide me a single connection that survives 'partial' disconnection?
Has anyone tried?
Thanks!
Can SoftEther work in same way - use multiple different, independent "circuits" from point A to point B, effectively channel-bonded by the multipath - and provide me a single connection that survives 'partial' disconnection?
Has anyone tried?
Thanks!
-
- Posts: 223
- Joined: Fri Jul 03, 2015 2:21 pm
Re: Multipath
Hi there!, sorry but i couldn't understand much about your problem, but a question comes into my mind, is your Balancing strategy network-level(L3) or transport level(L4) or application level (L7) ?
it's a good idea to provide us a draw about your scenario.
Good luck (:
it's a good idea to provide us a draw about your scenario.
Good luck (:
-
- Posts: 3
- Joined: Sat Jul 02, 2016 1:09 pm
Re: Multipath
multipath TCP handles the multiple routes, load balancing and so on at L4 (TCP connectivity), I just wondered if anyone has tried SoftEther over multipath TCP before?
Will try a drawing when got time, had hoped it would be an easy question :)
Will try a drawing when got time, had hoped it would be an easy question :)
-
- Posts: 2458
- Joined: Mon Feb 24, 2014 11:03 am
Re: Multipath
SoftEther doesn't support multipath TCP.
However you can connect multiple session on L7.
If you want to use multipath TCP on these sessions, you can use.
However you can connect multiple session on L7.
If you want to use multipath TCP on these sessions, you can use.