OpenVPN clients not connecting

Post your questions about SoftEther VPN software here. Please answer questions if you can afford.
Post Reply
sino32
Posts: 2
Joined: Tue Feb 03, 2015 12:11 pm

OpenVPN clients not connecting

Post by sino32 » Tue Feb 03, 2015 1:43 pm

I upgraded Server from version 9505 to version 9529.
All OpenVPN clients have problem to connect. All my clients is running under OpenWRT linux.

/log:
Channel 0: Acquiring an IP address from the DHCP server failed. To accept a PPP session, you need to have a DHCP server. Make sure that a DHCP server is working normally in the Ethernet segment which the Virtual Hub belongs to. If you do not have a DHCP server, you can use the Virtual DHCP function of the SecureNAT on the Virtual Hub instead.
Channel 0: Failed to connect a channel.
/endlog

have you same problems?

How to downgrade server to version 9505?

sino32
Posts: 2
Joined: Tue Feb 03, 2015 12:11 pm

Re: OpenVPN clients not connecting

Post by sino32 » Tue Feb 03, 2015 7:06 pm

Downgrade to 9505 version solve this problem.

Can you tell me how to connect OpenVPN clients (with small configuration build) in new version?

thisjun
Posts: 2458
Joined: Mon Feb 24, 2014 11:03 am

Re: OpenVPN clients not connecting

Post by thisjun » Tue Feb 10, 2015 9:36 am

What DHCP server do you use?

thisjun
Posts: 2458
Joined: Mon Feb 24, 2014 11:03 am

Re: OpenVPN clients not connecting

Post by thisjun » Tue Feb 10, 2015 9:36 am

What DHCP server do you use?

dfc643
Posts: 6
Joined: Mon Mar 23, 2015 4:08 am

Re: OpenVPN clients not connecting

Post by dfc643 » Mon May 04, 2015 4:49 am

I also have DHCP problem.
I tried on version 9529 and 9546.

Sometimes can't get IP from virtual DHCP.
After restarting VPN server will be fine.

Post Reply