secureNat, in kernel mode

Post your questions about SoftEther VPN software here. Please answer questions if you can afford.
Post Reply
hyper
Posts: 80
Joined: Sun Apr 21, 2013 8:04 pm

secureNat, in kernel mode

Post by hyper » Sun May 26, 2013 7:48 am

hi

i'm using softEther on vps
can i turn on kernel mode for securenat?
if possible, how can i do it?

cedar
Site Admin
Posts: 2070
Joined: Sat Mar 09, 2013 5:37 am

Re: secureNat, in kernel mode

Post by cedar » Mon May 27, 2013 9:13 am

In order to enable kernel mode SecureNAT, the following conditions are required.

1. There is DHCP service on LAN which is attached by NIC of the VPN server host.
2. Assigned IP address can access to the Internet by provided default gateway.

hyper
Posts: 80
Joined: Sun Apr 21, 2013 8:04 pm

Re: secureNat, in kernel mode

Post by hyper » Thu May 30, 2013 6:56 am

thanks for your reply

hyper
Posts: 80
Joined: Sun Apr 21, 2013 8:04 pm

Re: secureNat, in kernel mode

Post by hyper » Fri May 31, 2013 8:08 am

sorry, i start the dchp server on my vps and set the ips and gatway but softEther using virtual dhcp too :(

cedar
Site Admin
Posts: 2070
Joined: Sat Mar 09, 2013 5:37 am

Re: secureNat, in kernel mode

Post by cedar » Fri May 31, 2013 2:52 pm

Kernel mode SecureNAT is using a technology like a local-bridge.
Therefore SecureNAT can't use a DHCP server on the host itself.
Please prepare a DHCP server on another hosts on the LAN.

Post Reply