クラスタコントローラに設定すると、TAPデバイスがオフラインになる
Posted: Thu Nov 28, 2013 5:21 am
クラスタコントローラに設定した場合、TAPデバイスがオフラインになるのは仕様でしょうか?
また、クラスタコントローラやクラスタメンバーになった状態でも、TAPデバイスを利用することは可能でしょうか?
※ネットワーク構成は、前回私が投稿させて頂いたものと同様ですm(_ _)m
http://www.vpnusers.com/viewtopic.php?f=15&t=2416
簡単ですが、下記にログを記載させて頂きます。
// クラスタコントローラ設定時、TAPデバイスに関するログは
// [HUB "VHUB-HOGE"] The Local Bridge connection "hoge" was stopped.
// のように、vpnserver機能の再起動に伴う停止処理しか出現しませんでした。
★クラスタコントローラ設定入込み前: TAPデバイスオンライン
VPN Server>clustersettingget
Item |Value
---------------------+-----------------
Current Configuration|Standalone Server
The command completed successfully.
VPN Server>bridgelist
Number|Virtual Hub Name|Network Adapter or Tap Device Name|Status
------+----------------+----------------------------------+---------
1 |VHUB-HOGE1 |hoge1 |Operating
2 |VHUB-HOGE2 |hoge2 |Operating
The command completed successfully.
★クラスタコントローラ設定入込み後: TAPデバイスオフライン
VPN Server>clustersettingget
Item |Value
-------------------------------+------------------
Current Configuration |Cluster Controller
Controller Function Only |No
Performance Standard in Cluster|100
The command completed successfully.
VPN Server>bridgelist
Number|Virtual Hub Name|Network Adapter or Tap Device Name|Status
------+----------------+----------------------------------+-------
1 |VHUB-HOGE1 |hoge1 |Offline
2 |VHUB-HOGE2 |hoge2 |Offline
The command completed successfully.
お手数をお掛けしますが、ご回答の程、よろしくお願い致します。
また、クラスタコントローラやクラスタメンバーになった状態でも、TAPデバイスを利用することは可能でしょうか?
※ネットワーク構成は、前回私が投稿させて頂いたものと同様ですm(_ _)m
http://www.vpnusers.com/viewtopic.php?f=15&t=2416
簡単ですが、下記にログを記載させて頂きます。
// クラスタコントローラ設定時、TAPデバイスに関するログは
// [HUB "VHUB-HOGE"] The Local Bridge connection "hoge" was stopped.
// のように、vpnserver機能の再起動に伴う停止処理しか出現しませんでした。
★クラスタコントローラ設定入込み前: TAPデバイスオンライン
VPN Server>clustersettingget
Item |Value
---------------------+-----------------
Current Configuration|Standalone Server
The command completed successfully.
VPN Server>bridgelist
Number|Virtual Hub Name|Network Adapter or Tap Device Name|Status
------+----------------+----------------------------------+---------
1 |VHUB-HOGE1 |hoge1 |Operating
2 |VHUB-HOGE2 |hoge2 |Operating
The command completed successfully.
★クラスタコントローラ設定入込み後: TAPデバイスオフライン
VPN Server>clustersettingget
Item |Value
-------------------------------+------------------
Current Configuration |Cluster Controller
Controller Function Only |No
Performance Standard in Cluster|100
The command completed successfully.
VPN Server>bridgelist
Number|Virtual Hub Name|Network Adapter or Tap Device Name|Status
------+----------------+----------------------------------+-------
1 |VHUB-HOGE1 |hoge1 |Offline
2 |VHUB-HOGE2 |hoge2 |Offline
The command completed successfully.
お手数をお掛けしますが、ご回答の程、よろしくお願い致します。